The competition with the developing countries deepens the poverty problems ・ Hope to obtain the financial aid for the theoretically best invention of engine
patent Japan English Chinese Korean
Japan2 English2 Chinese2 Korean2
Japan3 English3 Chinese3 Korean3
Souri Japan4 English4 Chinese4 Korean4
Gokuhiengine５ English5 Chinese5 Korean5
(The invention of engine needs improving to realize 100 times of rotary output with the same fuel consumption)
All schoolbooks describe that the existing engines are the best in theory, but numerous fatal defects are available such as dead center. Among the best steam turbine power generation available now, there are many completely non-power stationary blades that make the moving blades jet backwards, while the moving blades block off the superheated steam, and make it change the direction of about 90° and rotate at a high speed as the sound velocity. Through appropriately 90% of the superheated steam distributes no power on the moving blade, it's still changed the direction of 90°, and only about 10% of the superheated steam is used for turbo drive. As a result, there exists the following fatal defect: the non-power stationary blade consumes about 90% of the superheated steam source. The adoption of mercury turbine with full moving blades can change some or even all existing steam break-out force into mercury break-out force, and accelerate the mercury vertically downwards in the vacuum. Therefore, the atmospheric power (kgf.m/sec.) equals appropriately to 1700×13.55 times = 23,000 times of the steam turbine, and thus forms the rolling contact drive of full moving blade mercury turbine mercury. Meanwhile, the engine that realizes over 100 times of rotary output with the same fuel consumption will be manufactured full automatically, which will be more beneficial than the reduction of labor cost.
(The continuous power generation by the existing steam turbine will have no way to prevent the extinction of human being)
The existing invention will be confronted with the following situation in future: The heat quantity arising out of the current thermal and nuclear electric power generation will make the sea surface temperature by about 6℃, where the phytoplankton will become extinct and fish stock will reduce. Once the annual power generation of China increases by 10%, the surface temperature of coastal waters in Japan shall be elevated twice in 10 years and 1024 times in 100 years. The elevating speed shall be much faster than the temperature rise arising out of the increased concentration of CO2. For example, the rise of sea surface temperature results in the extremely inclement tornado in east America; the enormous rain storm and dryness due to abnormal weather makes the wind velocity come to 300m/sec. within about 100 years, and the sea level goes up to 6m; Japan, which has the largest population density in East Asia will become the barren alkaline land without vegetation and buildings because of the sea breeze; hence, the human being will become extinct because of the sharp reduction of foodstuff as well as other reasons. Just as displayed in the television images, the Antarctic ice sheet will be collapsed due to the disappearance of the part below the sea level. The urgent matter is to alter the false explanation, put the rising value of sea surface temperature into computer, and replace immediately the existing steam turbine power generation equipments with thermoelectric and electric power generation units to prevent the rise of sea surface temperature, make the drainage temperature of combustion gas approximate to -273℃, apply CO2 dry ice effectively to other purposes, and avoid the extinction of human being in future!
(The theoretically best invention that realizes 100 times of rotary output superior to the existing technology)
If considered as per the atmospheric power of kgf.m/sec. as taught in primary school, since the rotary output is produced with the proportion between water and superheated steam at 1/1700, if 13.55 times of water is added to the existing steam turbine, the rotary output shall be produced from the mercury vapor turbine of full moving blades. The adoption of the break-out force of 530℃ 24MPa superheated steam and the break-out force of 600℃ high-temperature mercury + the speed of 40~400MPa mercury ejector let pump helps increase downwards the gravitational acceleration of high-temperature liquid mercury in the vacuum, and thus the atmospheric power equal appropriately to 1700×13.55 times = 23,300 times of the steam turbine. Therein, during the process of driving the rotary output of full moving blade mercury vapor turbine, the high-temperature mercury+ break-out force of high-temperature mercury will heat up the superheated steam, the rolling contact between dry steam and mercury will reduce the friction loss to the minimum. The use of rotary output 100 times superior to the existing technology will recycle the exhaust heat, suck air into the pump, recycle the exhaust heat repeatedly to the most extent, make the sucked air reach the limit, compress the air most effectively, form into the theoretically best heat pump and produce 100 times of rotary output.
(The invention of heat pump driven by the theoretically best engine can prevent the extinction of human being)
During the process of air exhaust by using the rotary output 100 times superior to the existing technology, the saturated steam at the temperature of about 35℃ and the liquid mercury at about 230℃ shall be discharged. When the discharged liquid of mercury at about 230℃ is applied to heat up the suction air and then its temperature is reduced to 60~200℃, the suction air is compressed to 800~1200℃ and correspondingly cool the air temperature to 60~200℃ by heat recovery. The theoretically best rotary output carries out the repeated compression and heat recovery, stores high-energy and high pressure air up to 400Mpa, forms into the theoretically best heat pump in vacuum to recover heat, and makes the recovered quantity of warm and cool heat to the maximum. During the final air-cooling process, the fuel will be combusted in the main combustion chamber and heat exchanger. And then the following unrestricted high-pressure combustion, heat exchange, cooling and combustion will make the break-out force of superheated steam and mercury (heat output of combustion gas) (warm heat) + (cool heat) and the break-out force of low-temperature combustion gas (quality output of combustion gas) to the maximum. Some of enormous cool heat arising out of quality output of combustion gas will cool the superheated steam and form into 30℃-condensed water. To sum up, this invention will prevent the adoption of existing nuclear electric power generation, the rise of sea surface temperature and human extinction.
(The separation of the rotary output part 100 times better than the existing technology from the jet propulsion output part can still produce the jet propulsion speed 10 times of the existing technology)
During the process of using the quality output of combustion gas to drive the mercury gas turbine of full moving blades, the break-out force of 60℃30~300MPa combustion gas will accelerate low-temperature mercury. Then the combustion gas at about -273℃ will be heated up with the low-temperature mercury at 400~0℃, and the temperature of combustion gas rises, the rotary output increases, and the mercury temperature reduces. The temperature of low-temperature mercury will come to the melting point at about -39℃, and make the superheated steam of mercury vapor turbine with full moving blades cooled to about 35℃ and form into condensed water, so the sea water temperature will not rise because of the existing power generation technology. Therefore the rotary output described in the website comes into being, which will avoid the existing power generation technology that is most dangerous to human extinction and thus protect human being from extinction. After the separation of the rotary output part 100 times better than the existing technology from the jet propulsion output part, the very simple combustion gas jet nozzle and superheated steam jet nozzle of combustor will be formed in the jet propulsion output part. During the jet propulsion process, the fuel in the 60℃ 30~300MPa combustion gas approximating to compressed air will be jetted and combusted, and superheated steam compressing apparatus will be annularly arranged surrounding the combustor in vacuum to heat up the superheated steam. Hence, the burning capacity of combustor ×combustion pressure and injection quantity of superheated steam × jet pressure will respectively come to 100 times, and the jet propulsion speed will increase to 10 times of the existing technology.
(Flying at the height of 100km with the Mach number of about 28, the engine can take you to travel every place on the earth within one day)
The theoretically best rotary output can be divided into thermal output + quality output of combustion gas, and be stored in great quantities. During the jet propulsion process, there is a small quantity of fuel combustion capacity, so when most 60℃30~300MPa combustion gas approximating to the compressed air is supplied to the combustor, the fuel will be jetted and combusted, the 400℃30~400MPa superheated steam generated by the superheated steam compressing apparatus arranged annularly surrounding the combustor will be heated up and jetted, and thus make the high-temperature and high-velocity jet of combustion gas possible, and make the jet propulsion speed 10 times faster than the existing technology easier to achieve. If the spacecrafts, jet planes and ships are made of such engines that can absorb the air, vacuum and water in front, they'll realize the speed 2~10 times faster than the existing technology. The speed of ships will approximate to the sound velocity; the vertical ascent and descent of planes will reach the limit; the spacecraft flying at the height over 100km with the Mach number of about 28, breaking away from the earth orbit and stopping the operation of engine, can travel every place on the earth within one day, and may also find the second earth through exploration flight at the limitless high speed similar to light velocity, and help fly away from the earth in the case of being unable to prevent human extinction.
(Occupy 100% of the world's market, be the champion in keeping the profit rate around the world, and make the largest contribution in human history)
Although it will take considerable cost and time in changing the existing heat power station and atomic power plant into heating power, electric power and cool heat supply equipments; the atmospheric power (kgf.m/sec.) of the output product of existing steam turbine is 1/23,000 of mercury, which is extremely unfavorable. Besides, because the stationary blade consumes about 90% of the speed power, the more and more fiercely abnormal weather in 10 years or also may result in human extinction. On the other hand, it can be predicted that heating power, electric power and cool heat supply equipments will bring enormous benefits; spacecrafts will gain considerable benefits from the competitive bidding and financing of travelers; if the heat quantity for power generation can be converted completely into 100℃ hot water to heat up the marsh gas, Japan will become the energy Superpower in future. Let's occupy 100% of the world's market, be the champion in keeping the profit rate around the world, make the largest contribution in human history, and marches gradually into such fields as military automobiles, planes and ships!
There are numerous fatal defects in the existing engine invention. To manufacture the best engine in the theory of limitations must need the participation of enterprise groups in excess of over 1000 employees as well as Japan, which plays an important role in Japan-US alliance. We hereby ask for support from the beginning of Patent Cooperation Treaty (PCT) and make full efforts to occupy independently 100% of the world's market! Hope people who aim at making the largest contribution in human history would offer your grand assistance and support.